Heating Service in Riverside, CA

Your heating system is responsible for keeping you warm and safe during the Winter. But a heating failure can leave you cold, with higher energy costs and little to no heat. Get your home back to normal with experienced heater service delivered by the Trabuco Hills Air experts. We offer comprehensive heating services on any of your heating units so that you can rest easy that we will get your heating back up and running in no time. Contact our experts today at (951) 824-7172 to schedule your heating service in Riverside, CA.

Close Up of Wrench Used for HVAC Repair

Don’t Get Stuck With a Cold House This Winter; Fix Your Heating System.

Heater Basics

Many systems, like furnace heaters, use a burner to warm your air and then a fan to deliver it to your vent system. Heat transfer is used by other units such as heat pumps and collects heat from outside air to be delivered inside. For your heater to perform optimally, every component in your unit must be in top condition or it can come to a screeching halt. Safety mechanisms are installed in every heating system to cut power in the event of system malfunction. No matter how durable your system is, it’s likely that you will need the help of a heating company sometime in your unit’s lifetime. Our experts will perform a full inspection of your system and deliver effectively affordable repair solutions. Call the Trabuco Hills Air technicians at (951) 824-7172 when you’re looking for a skilled heating service company in Riverside, CA that you can trust.

Repairing Your Heater

Within any heating system, there are parts that allow the heat production process to happen. Your entire system could be at risk when a single part malfunctions. Typically, heaters use a furnace to produce heat. These units use burners and fans to produce and circulate heat to your home’s vents. If you fan malfunctions that are responsible for clearing gases from the combustion chamber, the unit’s safety mechanism will block system ignition. If your system’s burners malfunction, your system won’t shut down, but instead only produce cool air. Similarly, heat pump systems deliver warm air to your home with a complex method and multiple parts. These systems use refrigerant to absorb heat from outside air and distribute it to your home. Just a small malfunction in your heat pump’s parts and the unit stops working effectively or efficiently. Even systems including boiler units, geothermal heaters, and oil systems need fully operational components for effective heating.

Different Types Of Heating Systems

Central Heating System Repair

Central Heating System Repair

Though most heaters are built with strength and durability in mind, even the best system may have problems from time to time. A broken thermostat may lead to an unbalanced operation and cold air delivery. Components like the blower fan, sensors, and heating mechanism can also lead to cold air delivery, early shut off time, or non-operation if they are damaged or worn. Call (951) 824-7172 to speak with our experts and get your central heater functioning at full force again. We provide reliable central heating repair all over the Riverside, CA area to ensure your home is always warm and comfortable.

How Your Central Heating Works

Woman Changing Thermostat

Central Heating Is Able To Warm Every Room In Your Home.

Heat pumps and furnaces are the two main styles of a central heating unit. Furnace-driven systems warm your air with the use of a heating mechanism. These systems may operate on gas or electricity and deliver heat for any temperature. However, furnaces sometimes fall victim to issues like a component failure, ignition damage, and heating element failure. Heat pump systems work by removing heat from outside your home and transferring it inside. While these systems are very convenient and efficient, they have a difficult time delivering very warm air in extremely cold Winter temperatures.

Electric Heat System Repair

Electric Heat System Repair

Technician Inspecting Dials on a Heater

Checking Your Thermostat Is a Good Place To Start To Check If Your HVAC Unit Is Working.

Common Problems in Electric Heating Units

Electric heating systems are some of the most reliable systems available. But, your heater could start having problems as time goes by. If you start to notice these signs, it is time to call a technician out to your home.

Low or No Air Blowing – Little or no blowing air usually stems from dirty filters inside your system. To ensure your heater blows effectively, properly inspect and change your filters. The low air supply can also be caused by more serious problems like a failing belt or blower fan, or a faulty exchanger or heating element.

Doesn’t Stop Blowing – Even though blowing issues can be linked to thermostat trouble, they are usually caused by a bad relay or limit switch.

Noisy Operation – Noises in your system may stem from just anything, from a panel access door that’s come loose to a bad blower. Technicians can accurately locate and repair your noisy heating system efficiently and effectively.

Blowing Cold Air – If your heater is blowing cold air, first examine your thermostat for damage. However, if your thermostat is operational, you most likely have a problem with the heating element or capacitors.

Gas Furnace Repair

Gas Furnace Repair

You will know you need to repair or replace your gas furnace when you see signs of problems that are arising. A gas furnace is nothing you should play around with. If you begin to see signs or think that there are problems happening, it is best to just call an HVAC technician out and get it looked at. Not only is this the best thing for your safety, but it is also the best thing for your gas system as well so that there are no problems that happen in the future. Knowing the signs upfront, is the best thing you can do so that if it happens, you will know what to look for and to pay attention to.

Top Gas Furnace Problems

A Vacuum Being Used to Clean a Furnace

Cleaning Your Gas Furnace Helps Avoid Problems.

You will know you need to repair or replace your gas furnace when you see signs of problems that are arising. Normal wear and tear and improper maintenance are the two main reasons behind gas furnace failure. While some furnace issues may appear to come out of nowhere, most issues can be identified by a few indicators. If your heating system isn’t producing sufficient heat, there could be a problem with your thermostat or your system may not be large enough to properly heat your area. A system that produces no warmth at all could mean that you have a gas line issue or even an ignition issue. If your system is running continuously, you most likely have a problem with the limit switch, although quick cycles indicate a dirty filter. The Trabuco Hills Air professionals are able to inspect your furnace to deliver effective repair options to get your heater performing as it should be. Call us at (951) 824-7172 and let us help.

The Trabuco Hills Air can provide effective heater repairs that stand the test of time, no matter what style of unit you use. Our experienced technicians are knowledgeable about each type of heater so you’re sure to get the high-quality repairs you need. For effective, hassle-free heating service throughout the Riverside, CA area, contact the Trabuco Hills Air techs at (951) 824-7172.